Original ZF lubricant from ATS
ZF EcoFluid XL — efficient axle protection for modern bus and truck fleets
ZF EcoFluid XL is built for ZF bus and truck axles where protection and efficiency have to work together. Its SAE 75W-85 formulation combines temperature resistance, gear and bearing protection, and low-friction performance to help the axle run efficiently without giving up durability under fleet operating conditions.
SAE 75W-85
12, 19
Axles A series, wheel heads RL series, Low-floor portal axles AV series, Low-floor portal axles AV 133 with efficiency package, A series, RL series
Extended efficiency axle fluid registered under ZF approval number ZF003441, optimized specifically to decrease energy loss and support extended maintenance intervals on low-floor portal axles.
Why Choose Original ZF EcoFluid XL SAE 75W-85
ZF EcoFluid XL SAE 75W-85 brings ZF axle protection into a lower-viscosity profile designed to reduce drag without treating protection as an afterthought.
- The value is controlled efficiency: less internal resistance while maintaining the gear and bearing protection expected in ZF axle applications.
- ZF approval means the oil is matched to the lubricant class and application, not chosen only by SAE viscosity or a generic gear-oil label.
- For operators, the business case is clear: better service confidence, lower wear risk and less chance of costly axle-related downtime.
Compatible ZF Groups and Typical Models
| Vehicle / unit group | ZF families and examples | Classes |
|---|---|---|
| Axles A series, wheel heads RL series | A series, RL series | 12B, 12E, 12M, 12N |
| Low-floor portal axles AV series | AV series | 12B, 12E, 12M, 12N, 12F |
| Low-floor portal axles AV 133 with efficiency package | AV 133 | 12F |
| Axles for trucks | APL 9000, APL 90 | 12B, 12E, 12M, 12N, 12S, … |
| Normal operation | VG750, VG754, VG1200, VG1600, … | 19A, 19B, 19C, 19D |
ZF TE-ML Coverage at a Glance
Axles and wheel heads for buses and trucks
Axles A series, wheel heads RL series, Low-floor portal axles AV series
Transfer and offset transmissions for commercial vehicles
Normal operation, Heavy-duty application
Oil Change Intervals (Key References)
| Reference | Interval |
|---|---|
| Buses (AV series) – Line operation, City operation, Suburban operation for low-floor portal… | 180,000 km / 110,000 miles |
| Buses (AV series) – Hot-country operation | 120,000 km / 80,000 miles |
| Buses (AV 133) – Line operation, City operation, Suburban operation for low-floor portal axl… | 300,000 km / 180,000 miles |
| Buses (AV 133) – Hot-country operation | 180,000 km / 110,000 miles |
| Normal operation (mixed on-highway and off-road operation) | 10,000 km / 60,000 km |
| Heavy-duty application (primarily off-road or special applications) | 10,000 km / 20,000 km |
Oil Quantity and Application Verification
ATS confirms the exact ZF axle, drive or application family, the correct TE-ML class, oil quantity and service interval before supply.
Main Applications and Related ZF Axle and Drive Pages
FAQ
Why choose original ZF EcoFluid XL SAE 75W-85 for an axle?
Axles work under high contact pressure. The oil must protect gears and bearings while matching the exact ZF lubricant class.
Is SAE viscosity enough to choose the right oil?
No. SAE viscosity does not replace TE-ML approval. The exact axle, operating conditions and lubricant class must match.
What should be checked during axle service?
Oil level, drain interval, breather condition, seals and the correct TE-ML class should be checked. A blocked breather or wrong oil can shorten the benefit of a good service.
What to Send for Fast Compatibility Check
- Photo of the ZF axle / drive nameplate or exact unit model.
- Vehicle or machine model and the exact application family.
- Mileage or operating hours, ambient conditions and duty profile.
- Previous oil type and recent service history if known.
Need original ZF EcoFluid XL 75W-85 for your ZF axle?
Send the ZF axle data. ATS confirms TE-ML class, quantity and interval for your exact configuration.